Remote call control Remote call control means you can answer and end calls with the button on your headset. "Not stated" means the headset works with this phone, but remote call control has not been verified.
Phone or app
Compatible
Connects via
Accessory needed
Remote call controlRemote call control means you can answer and end calls with the button on your headset. "Not stated" means the headset works with this phone, but remote call control has not been verified.
Please select the right audio device in 3CX, then choose the right headset integration device. Please shut down the Yealink USB Connect to use.Source: Yealink · updated 9 Nov 2026
Please make sure the Yealink USB Connect is running in the background. Go to the settings and choose the right audio device.Source: Yealink · updated 9 Nov 2026
Please select the right audio device in the softphone. Please also enable the Yealink headset integration in the softphone Audio Settings.Source: Yealink · updated 9 Nov 2026
Please select the right audio device in the softphone. Please also enable the Use the USB HID buttons to manage calls setting in the softphone audio settings.Source: Yealink · updated 9 Nov 2026
Only supported by Cisco phones with MPP/3PCC firmware. Please check your Cisco phone settings: Status -> Product information -> Product Name to confirm that it shows "3PCC" there.Source: Yealink · updated 9 Nov 2026
Only supported by Cisco phones with MPP/3PCC firmware. Please check your Cisco phone settings: Status -> Product information -> Product Name to confirm that it shows "3PCC" there.Source: Yealink · updated 9 Nov 2026
1. Please download Yealink Plugin from this link: support.yealink.com ↗ 2. Install the MSI plugin on the PC, and then re-start Jabber app. 3. Open Cisco Jabber - Settings - Audio - Select the Yealink headset as the preferred Speaker, Microphone, and Ringer device. Note: Currently only support the Windows system.Source: Yealink · updated 9 Nov 2026
Officially compatible. Please update the Webex version to V46.5 or higher Currently, it only supports Windows platformsSource: Yealink · updated 9 Nov 2026
Please select the right audio device in the softphone. Please enable the Yealink headset integration setting, which is behind the audio setting.Source: Yealink · updated 9 Nov 2026
Select the correct audio device in the Settings, and then enter headset integration. Open headset intergration, select the correct headset and save it;Source: Yealink · updated 9 Nov 2026
Go to Settings --> Audio, select the right audio device. After that, please also enable the Headset Controls setting.Source: Yealink · updated 9 Nov 2026
Read me first: support.yealink.com ↗Certified for Microsoft Teams · Certified USB device · certified 23 Dec 2020Source: Yealink · updated 9 Nov 2026Source: Microsoft's certified Teams devices list · read 10 Nov 2026
1. Only supports SIP version, does not support MiNet version. 2. Go to settings, Audio > Audio Mode option, and press the select button or Select softkey. 3. Use the up and down navigation keys to scroll the desired audio mode to: – Headset or – Speaker/Headset or – Headset/Speaker 4. Press the Save softkey to save your changes.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
To connect the USB-C port on Poly Edge phones, please purchase a separate USB-A-to-USB-C adapter for headset connection.Source: Yealink · updated 9 Nov 2026
Please select the right headset in the softphone's headset integration settings. Please select the right audio device in the softphone.Source: Yealink · updated 9 Nov 2026
1. Please select the right audio device in the Audio settings. 2. Please enable the headset integration, then select Manage headset and enable the HID headset setting.Source: Yealink · updated 9 Nov 2026
Please select the right audio device in the audio settings. Go to headset integrations, select the right headset, and save it.Source: Yealink · updated 9 Nov 2026
1. Please select the right audio device, then click 'Grant Permission' button to proceed. 2. If you’re running Evonex Connect in your browser, an additional pop-up may appear. Click ‘Connect’ to proceed.Source: Yealink · updated 9 Nov 2026
You need to download the following "Yealink plugin" and then upload it to Twilio. Yealink Plugin: supportx.yealink.com ↗ Twilio Flex Plugin Import & Replacement Guide: support.yealink.com ↗Source: Yealink · updated 9 Nov 2026
Please select the right Audio device in the softphone. In the Audio settings, the Headset Control setting is selected as "General".Source: Yealink · updated 9 Nov 2026
Please select the right Audio device in the softphone. Please also select the correct headset device in the Audio> Headset Integration settings.Source: Yealink · updated 9 Nov 2026
Please select the right audio device in the softphone. Please make sure the USB Device Ringer is on in the softphone Audio settings.Source: Yealink · updated 9 Nov 2026
Please select the right audio device in the softphone. After that, please go to headset integration and select the right Yealink headset.Source: Yealink · updated 9 Nov 2026
Please select the right audio device in the softphone. After that, please go to headset integration and select the right Yealink headset.Source: Yealink · updated 9 Nov 2026
Supports both Windows and MacOS x86_64 platforms. Third plug-in required: support.yealink.com ↗ After that, please select the right audio device in the softphone.Source: Yealink · updated 9 Nov 2026
Please make sure Yealink USB Connect app is running in the background.Zoom Workspace · Zoom Workspace — USB Wireless (dongle or base) · certified Sep 2021Source: Yealink · updated 9 Nov 2026Source: Zoom's certified hardware list · read 10 Nov 2026
1. After logging in, select ‘Yealink’ location, then press Apply. 2. Select the right audio device in the Audio Settings.Source: Yealink · updated 9 Nov 2026
